Comme ça a l'air un peu ''touchy'' à faire fonctionner sous Linux, ben j'me permet une petite sauvagarde des instructions trouvées sur le forum d'ubuntu.
Edit: ainsi qu'un extrait, plus-bas, de l'expérience réussis sous debian.
http://ubuntuforums.org/showthread.php?t=146278
USB WiFi - D-Link WUA-1340 - SOL maybe?
I just bought this card, D-Link WUA-1340, i am guessing it is a rt2500 card
but i cant find a bit on it on the ndiswrapper wiki pages or anything.
Its a newer card, i really hope im not SOL.
The driver that comes with it on CD dosent have any infs on it,
all exe's that extract the drivers and windows says the only driver files it uses are Dr71WU.sys...
The file is signed "Ralink 801.11 USB Wireless Adapter Driver" version 1.0.1.0.
I installed the sys file with ndiswrapper and it was "invalid"
Here's my outputs...
USB stuff from lshw...
irq:10
*-usb:0
description: USB Controller
product: 82801CA/CAM USB (Hub #1)
vendor: Intel Corporation
physical id: 1d
bus info: pci@00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:1800-181f irq:10
*-usbhost
product: Intel Corporation 82801CA/CAM USB (Hub #1)
vendor: Linux 2.6.12-9-386 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb UNCLAIMED
description: Generic USB device
product: 802.11 bg WLAN
vendor: Ralink
physical id: 1
bus info: usb@1:1
version: 0.01
capabilities: usb-2.00
configuration: maxpower=300mA speed=12.0MB/s
*-usb:1
description: USB Controller
product: 82801CA/CAM USB (Hub #2)
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:1820-183f irq:5
*-usbhost
product: Intel Corporation 82801CA/CAM USB (Hub #2)
vendor: Linux 2.6.12-9-386 uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
---------------------------------------------------------
lspci:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 05)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 05)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2)
0000:02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 7
0000:02:04.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
---------------------------------------------------------
ifconfig:
eth0 Link encap:Ethernet HWaddr 00:08:74:3C:57:59
inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::208:74ff:fe3c:5759/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2726 errors:0 dropped:0 overruns:0 frame:0
TX packets:1637 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1693046 (1.6 MiB) TX bytes:227161 (221.8 KiB)
Interrupt:10 Base address:0x3000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:17 errors:0 dropped:0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1111 (1.0 KiB) TX bytes:1111 (1.0 KiB)
---------------------------------------------------------
iwconfig:
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
---------------------------------------------------------
lsusb:
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 07d1:3c04 D-Link System
Bus 001 Device 001: ID 0000:0000
-------------------------------------------------------
There are a couple different places to find info about getting the ralink rt2500 set up but
they arent great. Please if you are sure thats what i need and that this card uses that chipset,
post the link that worked for you. Im running breezy.
Thanks!
enfact
enfact
Find all posts by enfact
Sponsored Links
#2
Old June 22nd, 2006
jz_element jz_element is offline
First
Join Date: Apr 2006
Beans: 3
Re: USB WiFi - D-Link WUA-1340 - SOL maybe?
Hi any luck since that.
I found there is driver for this D-Link WUA-1340 from http://ndiswrapper.sourceforge.net/m...index.php/List.
Than search WUA on that page you will find it, but I didn't make it work either.
Anyone know how to make it work?
jz_element
jz_element
Find all posts by jz_element
#3
Old September 15th, 2006
saveryquinn saveryquinn is offline
First
Join Date: Sep 2006
Beans: 2
Re: USB WiFi - D-Link WUA-1340 - SOL maybe?
Hello!
Having stumbled blindly for three days with USB wifi 'cards' that didn't work with Dapper
(a Belkin, a US Robotics too) I almost ran out of excuses to tell store clerks why I was
returning a working USB wifi 'card' (didn't want to hear one more clerk tell me "Well of course
it doesn't work. It isn't made for Linux). Finally bought the D-Link WUA-1340 Wireless G USB 2.0 Adapter.
Works through ndiswrapper like an ugly black charm
(well, when your laptop is an Inspirion 6400 black just doesn't go with it).
How'd it work? WARNING: Relative Linux newbie offering advice here.
Use caution. There may be and probably are a half-dozen simpler ways of doing this.
Pre: Running Ubuntu Dapper (Gnome) on a Dell Inspirion 6400 with the latest version of ndiswrapper
and wine from the Ubuntu repositories.
1. Put the D-Link resource CD in the drive. Plug in the adapter.
2. Go to the file "Drivers"
3. There sits a file "setup.exe"
4. In the shell type: wine setup.exe or in Nautilus 'right-click' the icon and
either "Open with Wine" or "Open With Other Application." In the case of the latter,
when the new 'select your app' window opens, click "Use a Custom Command" and enter "wine"
in that command line.
5. The D-Link setup wizard should appear. Follow all the steps just like you were in good ol Windows.
6. Once the installation is complete DON'T EXPECT your usb device to be working just yet
(even though the setup wizard suggests it might be).
7. In Nautilus open your "Home" folder. Crtl-H to show your hidden files.
Scroll down and open folder ".wine."
8. Now open the folder "drive_c"
9. Now open the folder "program files"
10. In that file there should be (if Wine and the D-Link wizard were successful)
a folder named "Drivers" You can make sure this is the correct folder by opening it.
Inside should be a number of files including that oh-so-prized Dr71WU.inf file!
11. Copy this whole "Drivers" folder to your home directory or wherever you'd like to have it
for ndiswrapper's needs.
12. Once copied, go back to the command line.
13. Run: ndiswrapper -l
14. Run: sudo ndiswrapper -i /home/yourname/yourdirectory/dr71wu.inf
(note here: on my laptop the inf file, when copied to my home folder, transformed from Dr71WU.inf
to dr71wu.inf)
15. Run: ndiswrapper -l to see if the driver loaded.
If everything worked you should see that both the driver and the hardware are present.
16. Run: sudo modprobe ndiswrapper
That's about it.
My adapter wasn't running until I rebooted my computer. That's an old Windows habit.
If you run into trouble during the installation, check resource pages for wine and ndiswrapper
running under Ubuntu.
Good luck!
saveryquinn
Old September 23rd, 2006
jcanady jcanady is offline
Have you guys had any problems with setting the mode?
I have used Fedora for years, and I had a wireless PCMCIA card. Then, it slid forward in the card and
broke the card and slot. So, now I purchased a D-Link WUA-1340 at Office Max.
I'm not having much luck. I got ndiswrapper to detect it (and Linux/Fedora), but it won't go out of
Ad-Hoc mode (easily). I can use the NetworkManager (part of GNOME), and it will finally work.
But, it takes a while sometimes. Even then, it gives me a dynamic IP (I use a static IP),
and it gives me the wrong DNS that I normally use.
I would really like to have my wireless back! Thanks so much.
Best Regards,
Jason
jcanady
jcanady
Find all posts by jcanady
#5
Old 1 Week Ago
Robert Citek's Avatar
Robert Citek Robert Citek is offline
First
to Robert Citek
Re: USB WiFi - D-Link WUA-1340 - SOL maybe?
Quote:
Originally Posted by saveryquinn View Post
Works through ndiswrapper like an ugly black charm (well, when your laptop is an Inspirion 6400 black
just doesn't go with it).
...
Good luck!
Thanks for your notes. They worked really well for me. Below are my notes which are based on yours. This was done on a Dell Latitude D610 running Ubuntu 6.06 LTS.
Installing the drivers from the CD using the Terminal application (Applications > Accessories > Terminal).
Code:
sudo apt-get update
sudo apt-get install wine ndiswrapper-utils # install wine and ndiswrapper
wine /media/cdrom/Drivers/setup.exe # unpackage drivers
: # insert WUA-1340 into the USB port when instructed
ndiswrapper -l # check nsdiswrapper
sudo ndiswrapper -i \
~/.wine/drive_c/Program\ Files/Drivers/Dr71WU.inf # insert driver
ndiswrapper -l # check nsdiswrapper
sudo modprobe ndiswrapper # load ndis module
lsmod | grep ndis # check list of loaded modules
dmesg | tail # determine new device name
ifconfig wlan0 # check interface
sudo ndiswrapper -m # add config to /etc/modprobe.d
cat /etc/modprobe.d/ndiswrapper # display module entry
Code:
sudo modprobe ndiswrapper # load ndis
: # insert WUA-1340 into USB port
dmesg | tail # determine new device name
ifconfig wlan0 # check interface
iwconfig wlan0 # check wireless settings
iwlist wlan0 scan # scan for WAPs
sudo iwconfig wlan0 \
essid "Free/Libre/OpenSource" # attach to WAP
iwconfig wlan0 # check wireless settings
sudo dhclient3 wlan0 # request IP address
ifconfig wlan0 # check interface
ping -c 4 cwelug.org # check networking
Code:
sudo dhclient3 -r wlan0 # release IP address
ifconfig wlan0 # check interface
: # remove WUA-1340 from USB port
ifconfig wlan0 # check interface
iwconfig wlan0 # check wireless settings
PART 2_______________________________________________________
Copié de là: http://thebigmachine.org/debian-on-inspiron-9400.html#dlink
I therefore invested in a D-Link WUA-1340 USB wireless doohickey. This was fun in itself to get working. A lot of googling and wading through bogus instructions, but this one was useful.
Essentially I had to add the vendor & product ID to rtmp_def.h:
{USB_DEVICE(0x07d1,0x3c04)}, /* D-Link */
(note: these values can be gleaned from the output of lsusb) then compile. What did I compile? The rt73 driver and firmware. Follow the general instructions in the README file in the driver tarball. Add this to /etc/network/interfaces, to ensure the interface comes up at boot:
auto rausb0___________________________________________________________________
iface rausb0 inet dhcp
pre-up ifconfig rausb0 up
wireless-essid ...
Articles
Aucun commentaire:
Enregistrer un commentaire
Votre commentaire constructif ( ou pas ! )